A wide range of accessories are available allowing you to expand your Mobile Yard as your flock grows. Every accessory is fully compatible with the Rappa Mobile Yard system.
5’ (1.5m) Aluminium Hurdle. Height 36” (0.9m)
Aluminium hurdle with top uprights to prevent leg breakage. Heat treated for strength. Complete with Long Pin. Used for the collecting and drafting pens, also useful for lambing pens.
|
7’ (2.1m) Aluminium Hurdle. Height 36” (0.9m)
Aluminium hurdle with top uprights to prevent leg breakage. Heat treated for strength. Complete with Long Pin. Used for the collecting and drafting pens, also useful for lambing pens.
|
5’ (1.5m) Aluminium High Hurdle. Height 39” (1.0m)
Higher version of our standard 5’ hurdle, particularly useful with flighty sheep or forcing pen. Complete with Long Pin.
|
7’ (2.1m) Aluminium High Hurdle. Height 39” (1.0m)
Higher version of our standard 7’ hurdle, particularly useful with flighty sheep or forcing pen. Complete with Long Pin.
|
Aluminium
Support Leg Essential to create a stable large pen. Easy to attach without detaching the hurdles or removing the pin. Comes with a short pin to hold fast to the ground and with slopped bottom to make dragging easy.
|
8’ (2.5m) Panel with coupling. Height 36” (0.9m)
Aluminium framed panels with non reflective matt plastic coated boards for easy wash down. Panel coupling makes Yard base connection easy.
|
8’ (2.5m) Panel. Height 36” (0.9m)
Aluminium framed panels with non reflective matt plastic coated boards for easy wash down. Panel coupling makes Yard base connection easy.
|
8’ (2.5m) Panel & Let Out Gate Right Hand. Height 39” (1.0m)
Aluminium framed panel with Let Out/Drafting gate. Ideal for drafting or releasing sheep when working in the race. Catch on the handle allows the gate to be locked in position if required.
|
8’ (2.5m) Panel & Let Out Gate Left Hand. Height 39” (1.0m)
Aluminium framed panel with Let Out/Drafting gate. Ideal for drafting or turning sheep when working in the race. Catch on the handle allows the gate to be locked in position if required.
|
8’ (2.5m) High Panel. Height 39” (1.0m)
Higher version of our standard panel, particularly useful with flighty sheep when drenching. Complete with Long Pin.
|
4’ (1.2m) Panel
with coupling Aluminium framed panel, shorter that the standard and ideal for connecting a Double Fill race to the Yard base. Use with our Swing Gate. Coupling makes connection easy.
|
33” (0.8m) Aluminium
Spreader Locate panels and hurdles to form a sturdy race, multi height lugs allow panel height to adjust. Lightweight and strong.
|
33” (0.8m) Aluminium Spreader and Spring Gate
Spring mounted gate with lock shut pin. Spring is over centred to keep the gate either closed or open. Useful at the end of a single drench race.
|
6’ (1.8m) Aluminium Forcing Gate and Frame
Used as part of a small forcing pen to "sweep" sheep in from the main pen, it ensures they stay tight and will move forward as they sense movement into the race.
|
18” (0.5m) Aluminium
Spreader A great way to make a stable race for foot bathing or any other job where you want to work outside the race. Multi height lugs allow height adjustment on the panels. Will take a Drop In gate.
|
Guillotine Gate
18” (0.5m) Ideal for speeding up the job by releasing sheep whilst staying behind them. It also saves a lot of walking. Especially useful with a footbath. Utilises the same 18” width as the Spreader and Anti Backing Gate.
|
Anti-Backing Gate
18” (0.5m) Simple sprung loaded bars allow the sheep to flow in one direction but stop them reversing or backing out of the race. Utilises the same 18” width as the Spreader and Guillotine Gate.
|
Double 33” (0.8m)
Spreader A double/tandem version of our standard 33” Spreader. Helps locate panels to form a sturdy double fill race. Also locates the Swing Gate if using.
|
Double 33” (0.8m) Spreader and 33” (1.8m) Gates
A double/tandem version of our standard 33” gate, each gate opens on opposite sides and forms the end of a double fill drench race.
|
33” (0.8m)
Swing Gate Hangs off a Double 33” Spreader to facilitate loading of sheep into each side of a double fill race system. Use in conjunction with the 4’ Panels.
|
Aluminium Long Pin (660mm)
Standard coupling pin used to connect all of our Hurdles. Every hurdle and panel come with one Long Pin.
|
Aluminium Short Pin (330mm)
Used to secure the Aluminium Support Leg, use two per Leg to secure to the ground and reduce movement.
|
Aluminium 2-Way Connector
Allows a little extra coupling space when hurdles or panels are tight. Especially useful when running a hurdle off the Yard Base.
|
Aluminium 3-Way Connector
Allows three hurdles or panels to be connected. Especially useful when you want to create a pen or spur from a run of hurdles.
|